Blueprint Holsters Glock43 Hybrid for large hands
Glock 43 custom hybrid clipBluePrint Holsters Glock 43 HybridBluePrint Holsters Glock 43 Hybrid sideGlock 43 custom hybrid IWB holster with leather loopsBlueprint Holsters Glock43 Hybrid for big handsBluePrint Holsters Glock 43 Hybrid holster pull the dotsBlueprint Holsters Glock43 custom cut learance

Glock 43 IWB Hybrid Holster

5 out of 5 based on 1 customer rating
(1 customer review)

$50.00$60.00

Available with a nice leather pull the dot fastener or easy to use nylon belt clip.

Made with the best material and quality hardware

Flared for easy entry of the weapon into the holster.

Pressed with Boltaron 4332  providing  high definition and superb hot climate durability

Holster is custom fitted with the actual weapon

Hardware is adjustable with rubber bushing to increase or decrease retention.

Full sweat/body shield designed into holster  creates a barrier between handgun and you.

Holster Cant can be ordered  straight, 10 degrees, or 15 degrees – if you want a custom cant use the comments in checkout.

Leather loops and belt clip can be ordered  1.5 or  1.750

See full product description below 

 

Clear

Product Description

Glock 43 IWB Hybrid Holster

Available with our custom dual leather loop which we call the Leather Tooth. Leather tooth is strong and wont break from use or pulling, its cut from the backs of the hide which is the strongest part of the hide. Cut from  7/8 oz quality grade  A leather.  We install pull the dot fasteners to lock the holster to the belt.
If you like fast easy the nylon belt clip works well too. 

The leather backer is specifically shaped for the Glock 43. Its custom cut, beveled, burnished,  the shape is designed for hand and thumb clearance.  Its also designed so that the leather backer does not impede your draw and grip.  The leather backer is grade A 10/12 oz Herman Oak bridle.  The edges on the leather are rounded for comfort, only a minimal amount of leather stick past the shell to keep the holster as small as possible but have strength and proper retention.  The edges are burnished and Effax leather conditioners are applied to seal it for long life. Firearm retention is always set with a real fire arm.

Our shell is  made from .080  Boltaron 4332, and we form with our own custom propitiatory molds to get the right fit.

The leather straps are cut from backs of the hide which is the strongest part. We don’t comprises on the leather as we want strength and the nicest looking product we can make. Pull the dot fasteners are used so that it will only come unfastened when pulling in one direction.  Nothing is left raw or undone.  As we always we provide adjustable retention so that you can make it to your licking. The post and screws are high quality. We use large posts so that they will never fail even when force is used. We have seen rivets on holster fail when force is used.

The straps or belt clips can be ordered with four different cant configurations ranging from zero to 15 degrees. If your going to carry appendix a small amount of cant will give you more hand clearance near the trigger.

There are two lengths on straps and clips to suit  1.5 and 1.75 gun belts.

The leather straps does offer strength, security, and a classy look but it does cost a little more than the belt clip. Black is currently the only color for the leather. The leather strap is named Leather Tooth because its shaped like a tooth when seen unfastened.

 

 

 

Additional Information

Weight 4 oz
Belt Size

1.5 Default, 1.75

Cant

Zero, Three, 10 degrees, FBI 15 degrees-Defualt

Leather strap or Nylon belt clip

Leather strap, Nylon belt clip

1 review for Glock 43 IWB Hybrid Holster

  1. 5 out of 5

    (verified owner):

    After a few days and many hours of research I decided upon BluePrint Holster for my source of Holsters for my recently acquired Glock 43. The Glock 43 IWB Hybrid Holster looked like the perfect balance of comfort and ease of use. I really liked the fact that real firearms are used to mold the holsters instead of models of the firearm. I am happy to report that it is as good as I hoped it would be. It is as easy to slip into my waistband as any small IWB holsters I have owned or tried in the past and spreads the footprint of the holster over a larger area. The leather backing made it very comfortable the first time it is used and I anticipate that it will become even more comfortable the more I use it. That is especially helpful when carrying for long periods and when sitting down. Even with the holster at the 5 o-clock to 5:30 position behind my back, it does not cause any discomfort while sitting and/or driving for long periods. The gun is still accessible with a slight lean forward if needed (for use or for removing the holster before entering government buildings or banks, etc). It is easy to put back on even while seated in a vehicle as well. This will be my go-to holster for my Glock 43 (my Glock 43 is my go-to concealed carry weapon now as well). I live in Florida and it is usually hot except for the two days of winter we get here each year. The body guard/sweat guard was one of the requirements when I was searching for a new holster. The sweat guard on this holster works great. Speaking of hot temperatures, I was happy to learn of the materials used (Boltaron 4332) instead of regular kydex. Regular kydex is susceptible to extreme temperatures and I do not need to worry about leaving this holster in my truck even on the hottest days (it does not help that my truck is painted black and gets very hot when parked outside during the day). I ordered my holster with the belt clip for ease of use. It is strong and hold the holster in place well. There is also a latch that is angled to catch the belt if the holster slides up at all when drawing your gun. The latch/lip on the end of the belt clip is not flat, it is angled (it is hard to tell from the pictures, but it is very well designed). It is worth mentioning that I am just a customer and have no association with BluePrint Holsters or its employees and did not receive any compensation for this review. I was very impressed with the customer service, professionalism, and product and it was worth my time to pass along my experience and opinion. I did order the leather belt loop kit to try out at some point because I have never used belt loops on a holster before, however I will probably only use them when I will be using the holster all day everyday for a while with no need to take the holster off until the end of the day. The belt clip works very well and I trust that it would never allow the holster to be removed when drawing the gun. I ordered the regular IWB holster too for times when I will be putting the Holster on and taking it off many times throughout the day (there are days when my job has me going into and out of government buildings throughout the day where firearms are not allowed). The regular IWB may be a slightly easier to put on and take off than the IWB hybrid, but I have not had a chance to test that theory out yet. I also thought that it may be better for 2 o-clock to 3:30 carry positions, but I have been using the IWB hybrid most of the time so far. I will do a short review on the IWB holster as well and refer to this review for the more information. I recommend this holster and products from BluePrint Holsters to anyone including friends and family. Regards, Conrad

Add a review